GD25D10CEIGR

画像は参照用のみです。

GD25D10CEIGR

IC FLASH 1MBIT SPI/DUAL 8USON

  • メーカー
  • Mfr。パート #GD25D10CEIGR
  • パッケージ 8-XFDFN Exposed Pad
  • データシート
  • 在庫中9581

100% オリジナル &新しい

出荷の準備ができている24時間

365日の保証

RFQおよびもっと割引を得る

仕様

Supplier GigaDevice Semiconductor (HK) Limited
Package Tape & Reel (TR),Cut Tape (CT)
ProductStatus Active
MemoryType Non-Volatile
MemoryFormat FLASH
Technology FLASH - NOR
MemorySize 1Mb (128K x 8)
MemoryInterface SPI - Dual I/O
ClockFrequency 100 MHz
WriteCycleTime-WordPage 50µs, 4ms
Voltage-Supply 2.7V ~ 3.6V
OperatingTemperature -40°C ~ 85°C (TA)
MountingType Surface Mount
Package/Case 8-XFDFN Exposed Pad

概要

Description

GD25D10CEIGR is a 1 Mbit serial SPI flash memory from GigaDevice (GD25D10C family). It provides non-volatile storage (128 KB) accessible over an SPI bus with 3‑byte addressing. Key features: Vcc usually 2.7–3.6 V; SPI interface; 256‑byte page size; sectors of 4 KB; supports Read/ Fast Read, Page Program (256 B), Sector Erase, Chip Erase; Deep Power-Down and Hold/WP protections. Endurance typically in the 10^4–10^5 program/erase cycles range with data retention around two decades. It comes in an 8‑pin SPI package (e.g., SOP8/SOIC8). Applications include bootloaders, firmware or data storage for microcontrollers, and small embedded storage needs. For exact timing, clock rate (often tens of MHz), command set, and pinout, consult the GD25D10C datasheet for the EIGR variant.

Features

Key features of GD25D10CEIGR:
- 1 Mbit (128 Kbytes) serial flash memory
- SPI-compatible serial interface (standard read; fast-read mode)
- Operating voltage: 2.7–3.6 V
- Page size: 256 bytes
- Erase architecture: 4 KB sectors; larger blocks (e.g., 64 KB) and chip erase
- Endurance: typically up to 100,000 P/E cycles
- Data retention: ~20 years
- Low-power modes: deep power-down and standby
- Security/protection: hardware write protection and status register features
- Temperature range: industrial -40°C to 85°C
- Package: 8-pin small-outline (SOP/USON) with RoHS-compliant routing
- Applications: code storage/boot load, small firmware storage, data logging
Note: Always verify exact timing, read speeds, and block sizes in the datasheet for your specific revision.

Package

8-pin SOP (SOIC-8) package; RoHS-compliant.

Pinout

- Pin count: 8 pins (SOP-8/8-pin package, RoHS).
- Function: 1 Mbit serial SPI flash memory (GD25D10C). Interfaces via CS, CLK, DI (SI), DO (SO), WP, HOLD, VCC, GND; supports standard flash operations (Read, Fast Read, Page Program, Sector/Chip Erase) for storing firmware/data.

Manufacturer

- Manufacturer: GigaDevice Semiconductor (Beijing) Co., Ltd. (GigaDevice)
- What kind of company: A Chinese fabless semiconductor company specializing in non-volatile memory products, especially NOR/serial flash memory and related ICs.

Application

Applications of GD25D10CEIGR:
- Firmware storage and bootloader for microcontrollers/SoCs
- Code and data storage for embedded systems (IoT, wearables, consumer electronics)
- Firmware updates and removable storage for development boards
- Data logging and calibration/configuration storage in sensors, industrial equipment, and automotive
- Look-up tables, parameters, and small datasets requiring nonvolatile memory

Equivalent

GD25D10CEIGR is a 1 Mbit (128 KB) serial SPI flash. Common cross equivalents:
- Winbond W25Q10BV/W25Q10DV
- Macronix MX25L1006E
- ISSI IS25LP010
- Spansion S25FL010K
- EON EN25Q10
Note: check voltage (2.7–3.6V), package, timing, and command compatibility with datasheets.

出荷

出荷方法私たち

DHL、FedEx、TNT、UPS、またはあなたの選択の他の運送業者を通じてグローバルな出荷サービスを提供します。


出荷料参照（DHL/FedEx）:

DHL の: 配送費は25ドル〜45ドル（0.5kg）の範囲で、推定配送時間は2〜5営業日です。

フェデックス: 配送費は25ドル〜40ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

UPS の: 配送費は25ドル〜45ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

TNT社: 配送費は25ドル〜65ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

EMS: 配送料金は30〜50ドル（0.5kg）の範囲で、推定配送時間は7〜15営業日です。

登録航空郵便: 配送費は2〜4ドル（0.1kg）で、推定配送時間は5〜20営業日です。

支払い

Payment Methods

支払い期間は100％前払いです。

現在、下記の支払い方法のみを受け入れています。:

1. ペイパル

2. クレジット・デビットカード

3. ワイヤー 転送

類似