EPM7256AETC100-10

画像は参照用のみです。

EPM7256AETC100-10

IC CPLD 256MC 10NS 100TQFP

  • メーカー
  • Mfr。パート #EPM7256AETC100-10
  • パッケージ 100-TQFP
  • データシート
  • 在庫中2442

100% オリジナル &新しい

出荷の準備ができている24時間

365日の保証

RFQおよびもっと割引を得る

仕様

Supplier Intel
Package Tray
Series MAX® 7000A
ProductStatus Obsolete
ProgrammableType In System Programmable
DelayTimetpd(1)Max 10 ns
VoltageSupply-Internal 3V ~ 3.6V
NumberofLogicElements/Blocks 16
NumberofMacrocells 256
NumberofGates 5000
NumberofI/O 84
OperatingTemperature 0°C ~ 70°C (TA)
MountingType Surface Mount
Package/Case 100-TQFP

概要

Description

Introduction to EPM7256AETC100-10:
- Type: Altera/Intel EPLD (EPM7256A family), a small, reprogrammable logic device.
- Key specs: 256 macrocells, 100-pin TQFP package (ETC), 3.3V operation, speed grade -10 (slower end of the range).
- Purpose: implement glue logic, simple state machines, decoders, counters, and interface logic between components.
- Programming: configured with Altera/Intel tools (Quartus II or older MAX+PLUS II) using programmers such as ByteBlaster or USB-Blaster; in-system/in-circuit programming may be supported via JTAG/AS interfaces on board.
- Notes: older/legacy device family; tool support and availability may be limited compared to modern devices. Suitable for retro designs or educational projects needing small, custom logic.

Features

Here are the main features of the EPM7256AETC100-10 (MAX II CPLD):
- High-density CPLD in 100-pin TQFP package, part number EPM7256AETC100-10
- 256 macrocell-based logic fabric for flexible, low-cost digital design
- On-chip non-volatile configuration memory (FPROM) for in-system reconfigurability; supports serial configuration (FPS/Active Serial) with no external config memory needed
- Flexible I/O banks capable of supporting standard CPLD I/O levels (typical 3.3V and 2.5V signaling; some pins 5V-tolerant depending on bank)
- JTAG boundary-scan for programming and debugging
- In-system programmable and reconfigurable design flow using standard tools (Quartus II/Intel design software)
- Low power consumption and small form factor suitable for space- and cost-constrained designs
- General-purpose registers, combinational logic, simple state machines, and routing resources for rapid prototyping
Note: Exact I/O counts per bank and voltage/tolerance specifics depend on the device’s bank configuration; consult the datasheet for precise electrical characteristics.

Package

It uses a 100-pin TQFP (Thin Quad Flat Pack) package.

Pinout

- Pin count: 100 pins (TQFP-100)
- Function: Altera MAX 7000A family 256-macrocell EPLD/CPLD device for implementing general digital logic (glue logic, etc.).

Manufacturer

- Manufacturer: Altera Corporation (now part of Intel Corporation).
- Company type: Semiconductor company specializing in programmable logic devices (PLDs), including EPLDs/CPLDs and FPGAs.

Application

Typical applications for the EPM7256AETC100-10 CPLD include:
- Glue logic for microprocessors/ASICs (address decoding, bus interfacing)
- Simple state machines and control logic
- I/O expansion and peripheral interfaces (LEDs, displays, GPIO)
- Timing utilities: counters, timers, PWM
- Clock-domain crossing and timing alignment
- Prototyping, development boards, and educational projects

出荷

出荷方法私たち

DHL、FedEx、TNT、UPS、またはあなたの選択の他の運送業者を通じてグローバルな出荷サービスを提供します。


出荷料参照(DHL/FedEx):

DHL の: 配送費は25ドル〜45ドル(0.5kg)の範囲で、推定配送時間は2〜5営業日です。

フェデックス: 配送費は25ドル〜40ドル(0.5kg)の範囲で、推定配送時間は3〜7営業日。

UPS の: 配送費は25ドル〜45ドル(0.5kg)の範囲で、推定配送時間は3〜7営業日。

TNT社: 配送費は25ドル〜65ドル(0.5kg)の範囲で、推定配送時間は3〜7営業日。

EMS: 配送料金は30〜50ドル(0.5kg)の範囲で、推定配送時間は7〜15営業日です。

登録航空郵便: 配送費は2〜4ドル(0.1kg)で、推定配送時間は5〜20営業日です。

支払い

Payment Methods

支払い期間は100%前払いです。

現在、下記の支払い方法のみを受け入れています。:

1. ペイパル

2. クレジット・デビットカード

3. ワイヤー 転送