DS1631AU

画像は参照用のみです。

DS1631AU

SENSOR DIGITAL -55C-125C 8UMAX

100% オリジナル &新しい

出荷の準備ができている24時間

365日の保証

RFQおよびもっと割引を得る

仕様

Supplier Rochester Electronics, LLC,Analog Devices Inc./Maxim Integrated
Package Tube,Tube
ProductStatus Obsolete
SensorType Digital, Local
SensingTemperature-Local -55°C ~ 125°C
OutputType I²C
Voltage-Supply 2.7V ~ 5.5V
Resolution 11 b
Features One-Shot, Output Switch, Programmable Limit, Programmable Resolution, Standby Mode
Accuracy-Highest(Lowest) ±0.5°C (±2°C)
TestCondition 0°C ~ 70°C (-55°C ~ 125°C)
OperatingTemperature -55°C ~ 125°C
MountingType Surface Mount
Package/Case 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

概要

Description

DS1631AU is a Dallas/Maxim DS1631 digital thermometer sensor with an I2C (two‑wire) interface. It provides local temperature readings from -55°C to +125°C with selectable 9–12‑bit resolution. Key features include a programmable conversion rate, on-chip temperature alarm thresholds (TH/TL) and an ALERT output, plus low power operation with a shutdown/power‑down mode. It typically runs from 2.7–5.5 V and is offered in an 8‑pin package (AU suffix indicates a packaging/lead‑free variant; verify exact package in the datasheet).
Usage snapshot:
- Read the TEMP register for the current temperature.
- Configure resolution and conversion rate as needed.
- Set high/low alarm thresholds to trigger ALERT if exceeded.
Applications include battery packs, server and industrial temperature monitoring, and other embedded systems requiring precise, low‑power temperature sensing. For exact timing, current, and pin settings, consult the DS1631AU datasheet.

Features

DS1631AU is a Dallas/Maxim digital temperature sensor with I2C (2-wire) interface and built-in thermostat features. Key features:
- Temperature range: -55°C to +125°C
- Programmable resolution: 9–12 bits (0.5°C to 0.0625°C steps)
- Programmable high/low temperature limits with hysteresis
- Interrupt/alert output for over/under-temperature conditions
- I2C-compatible serial interface (MBus/SMBus compatible)
- Power supply: 2.7V to 5.5V
- Low power operation with very small standby current
- Configurable conversion mode (one-shot or continuous)
- Address select options (for multiple devices on the same bus)
- 8-pin package (DS1631AU variant)
用途: battery packs, temperature monitoring in electronics, thermal protection.

Package

DS1631AU is in an 8-pin Small-Outline IC package (SOIC-8).

Pinout

The DS1631AU is an 8‑pin device. Pin functions (typical SO/PDIP mapping):
- A2, A1, A0 — hardware address inputs (set the I2C/2‑wire slave address)
- GND — ground
- SDA — serial data (I2C bi‑directional)
- SCL — serial clock (I2C)
- V+ (VCC) — supply voltage
- NC — no connect (unused)
Functionally it is a digital temperature sensor/thermostat with a 2‑wire (I2C‑compatible) serial interface, programmable alarm/thermostat limits, and onboard temperature registers.

Manufacturer

Manufacturer: Dallas Semiconductor (DS), an American semiconductor company that designs and manufactures integrated circuits and sensors (the DS1631AU is one of its temperature-sensor/IC products). Dallas Semiconductor later became part of Maxim Integrated (now part of Analog Devices).

Application

DS1631AU is a digital temperature sensor with I2C interface (9–12 bit, alarm). Typical applications:
- Temperature monitoring in embedded systems and microcontrollers
- Battery packs and power-management thermal protection
- Data loggers and environmental monitoring
- HVAC, refrigeration, and cold-chain systems
- Medical devices needing precise temperature sensing
- Industrial process control and monitoring
- Automotive thermal management and cabin sensors

Equivalent

DS1631AU is a Dallas/Maxim I2C digital temperature sensor. Close equivalents (2‑wire I2C, similar temp range) include:
- TI TMP102
- TI TMP75/TMP75A
- NXP LM75 / LM75A
- Microchip MCP9808
- Analog Devices ADT7420 / ADT75
Note: pinout, supply voltage, and I2C address differ; verify electrical specs and package before replacement.

出荷

出荷方法私たち

DHL、FedEx、TNT、UPS、またはあなたの選択の他の運送業者を通じてグローバルな出荷サービスを提供します。


出荷料参照（DHL/FedEx）:

DHL の: 配送費は25ドル〜45ドル（0.5kg）の範囲で、推定配送時間は2〜5営業日です。

フェデックス: 配送費は25ドル〜40ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

UPS の: 配送費は25ドル〜45ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

TNT社: 配送費は25ドル〜65ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

EMS: 配送料金は30〜50ドル（0.5kg）の範囲で、推定配送時間は7〜15営業日です。

登録航空郵便: 配送費は2〜4ドル（0.1kg）で、推定配送時間は5〜20営業日です。

支払い

Payment Methods

支払い期間は100％前払いです。

現在、下記の支払い方法のみを受け入れています。:

1. ペイパル

2. クレジット・デビットカード

3. ワイヤー 転送

類似