CSD87333Q3D

画像は参照用のみです。

CSD87333Q3D

MOSFET 2N-CH 30V 15A 8SON

100% オリジナル &新しい

出荷の準備ができている24時間

365日の保証

RFQおよびもっと割引を得る

仕様

Supplier Texas Instruments
Package Tape & Reel (TR),Cut Tape (CT)
Series NexFET™
ProductStatus Active
FETType 2 N-Channel (Dual) Asymmetrical
FETFeature Logic Level Gate, 5V Drive
DraintoSourceVoltage(Vdss) 30V
Current-ContinuousDrain(Id)@25°C 15A
RdsOn(Max)@IdVgs 14.3mOhm @ 4A, 8V
Vgs(th)(Max)@Id 1.2V @ 250µA
GateCharge(Qg)(Max)@Vgs 4.6nC @ 4.5V
InputCapacitance(Ciss)(Max)@Vds 662pF @ 15V
Power-Max 6W
OperatingTemperature 125°C (TJ)
MountingType Surface Mount
Package/Case 8-PowerTDFN

概要

Description

CSD87333Q3D is TI’s NexFET dual N-channel power MOSFET in a 3x3 mm QFN (Q3D) package, automotive-qualified for harsh environments. It contains two N-channel FETs rated for roughly 30 V with low on-resistance (typical around tens of milliohms per FET) and fast switching, optimized for high-efficiency switching regulators.
Key points:
- Package: QFN-3x3 with exposed pad for heat dissipation
- Rating: about 30 V, dual N-channel devices
- Resistance: typically tens of mΩ per FET
- Features: low gate charge, suitable for synchronous buck/converter use
- Applications: automotive and industrial DC-DC converters, power management, half-bridge topologies
- Use: connect as a high-side/low-side pair per datasheet; ensure proper gate drive voltage and thermal management
For exact electrical specs, recommended operating conditions, and PCB footprint, consult the TI datasheet.

Features

Here are the typical features of TI CSD87333Q3D (Automotive-grade) at a glance:
- Automotive-grade, Q3D—AEC-Q100 compliant package
- Synchronous buck regulator with integrated high-side and low-side MOSFETs
- Wide input voltage range (suitable for 12/24V automotive rails)
- Adjustable output via external feedback (and fixed-output variants may exist)
- Soft-start and enable pin; power-good/reset signaling
- Current-mode control with PWM operation
- Protections: overcurrent/short-circuit protection, thermal shutdown, undervoltage lockout
- High efficiency благодаря synchronous topology
- Small 3×3 mm QFN package with exposed pad for thermal dissipation
Note: exact output voltage options, switching frequency, and pinout may vary by specific variant. For precise specs, consult the TI datasheet for CSD87333Q3D.

Package

CSD87333Q3D is in an 8‑pin QFN package (3.0 x 3.0 mm) with an exposed pad.

Pinout

Pin count: 16 pins in a 3.0 × 3.0 mm QFN package, plus an exposed pad (center pad).
Function: Dual N-channel MOSFET pair intended for power switching (high-side and low-side) in synchronous buck converters. Each FET has its own gate; drains are commonly tied to the package center pad (and/or dedicated drain pins per package variant), with sources connected to the respective nodes. For exact pinout and wiring, see the CSD87333Q3D datasheet.

Manufacturer

- Manufacturer: Texas Instruments (TI)
- What kind of company: American multinational semiconductor company that designs and manufactures analog, embedded processing, and other integrated circuits and components.

Application

Applications of CSD87333Q3D:
- Synchronous buck DC-DC converter power stage for VRMs in CPUs/GPUs/FPGAs/SoCs
- Automotive 12V/24V power networks as load-switch and PWM switching devices
- Motor control for BLDC/PMSM drives
- High-efficiency switching regulators in telecom and industrial equipment
- Point-of-load power management in battery-powered devices

出荷

出荷方法私たち

DHL、FedEx、TNT、UPS、またはあなたの選択の他の運送業者を通じてグローバルな出荷サービスを提供します。


出荷料参照（DHL/FedEx）:

DHL の: 配送費は25ドル〜45ドル（0.5kg）の範囲で、推定配送時間は2〜5営業日です。

フェデックス: 配送費は25ドル〜40ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

UPS の: 配送費は25ドル〜45ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

TNT社: 配送費は25ドル〜65ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

EMS: 配送料金は30〜50ドル（0.5kg）の範囲で、推定配送時間は7〜15営業日です。

登録航空郵便: 配送費は2〜4ドル（0.1kg）で、推定配送時間は5〜20営業日です。

支払い

Payment Methods

支払い期間は100％前払いです。

現在、下記の支払い方法のみを受け入れています。:

1. ペイパル

2. クレジット・デビットカード

3. ワイヤー 転送

類似