画像は参照用のみです。
ATSAMC21J18A-MUT
IC MCU 32BIT 256KB FLASH 64QFN
- メーカー
- Mfr。パート #ATSAMC21J18A-MUT
- パッケージ 64-VFQFN Exposed Pad
- データシート ATSAMC21J18A-MUT DataSheet
- 在庫中7625
100% オリジナル &新しい
出荷の準備ができている24時間
365日の保証
RFQおよびもっと割引を得る
仕様
| Supplier | Microchip Technology |
| Package | Tape & Reel (TR),Cut Tape (CT) |
| Series | SAM C21, Functional Safety (FuSa) |
| ProductStatus | Active |
| CoreProcessor | ARM® Cortex®-M0+ |
| CoreSize | 32-Bit Single-Core |
| Speed | 48MHz |
| Connectivity | CANbus, I²C, LINbus, SPI, UART/USART |
| Peripherals | Brown-out Detect/Reset, DMA, POR, WDT |
| NumberofI/O | 52 |
| ProgramMemorySize | 256KB (256K x 8) |
| ProgramMemoryType | FLASH |
| RAMSize | 32K x 8 |
| Voltage-Supply(Vcc/Vdd) | 2.7V ~ 5.5V |
| DataConverters | A/D 20x12b, 3x16b; D/A 1x10b |
| OscillatorType | Internal |
| OperatingTemperature | -40°C ~ 85°C (TA) |
| MountingType | Surface Mount |
| Package/Case | 64-VFQFN Exposed Pad |
概要
Description
ATSAMC21J18A-MUT is a Microchip/Atmel MCU in the SAM C21 family (32-bit ARM Cortex‑M0+). It targets mid‑range embedded apps and combines:
- Core: ARM Cortex‑M0+ at up to 48 MHz
- Memory: flash and RAM (exact sizes vary by variant; refer to the datasheet for this part)
- Peripherals: SERCOM modules (USART/SPI/I2C), timers, ADC, and often USB Full‑Speed device; plus event system and DMA
- Low‑power features for energy‑efficient designs
The “MUT” suffix denotes a specific variant/packaging used for testing or evaluation; exact pinout, memory, and USB capabilities should be confirmed on the datasheet or product page for this exact part.
Development and debugging: use Microchip Studio or MPLAB X IDE with the XC32/GCC toolchain; program/debug with supported hardware (e.g., Atmel-ICE, or other SWD-compatible debuggers).
Typical uses: USB peripherals, sensor interfaces, IoT edge devices, and other power‑conscious embedded applications. For precise specs, consult the official datasheet and product page.
- Core: ARM Cortex‑M0+ at up to 48 MHz
- Memory: flash and RAM (exact sizes vary by variant; refer to the datasheet for this part)
- Peripherals: SERCOM modules (USART/SPI/I2C), timers, ADC, and often USB Full‑Speed device; plus event system and DMA
- Low‑power features for energy‑efficient designs
The “MUT” suffix denotes a specific variant/packaging used for testing or evaluation; exact pinout, memory, and USB capabilities should be confirmed on the datasheet or product page for this exact part.
Development and debugging: use Microchip Studio or MPLAB X IDE with the XC32/GCC toolchain; program/debug with supported hardware (e.g., Atmel-ICE, or other SWD-compatible debuggers).
Typical uses: USB peripherals, sensor interfaces, IoT edge devices, and other power‑conscious embedded applications. For precise specs, consult the official datasheet and product page.
Features
ATSAMC21J18A-MUT is a member of Microchip’s SAM C21 family. Key features include:
- 32-bit ARM Cortex-M0+ core, up to 48 MHz
- On-chip Flash memory and SRAM
- SERCOM peripherals for UART, SPI, and I2C (flexible pin multiplexing with DMA support)
- USB 2.0 Full-Speed device (where applicable on the package)
- Analog: 12-bit ADC with multiple channels (typical for the family)
- Timers, PWM, and capture/compare features
- Event System and DMA controller for low‑CPU‑overhead peripheral signaling
- Power management: multiple sleep modes, deep sleep, and brown-out/reset options
- Wide operating voltage range (generally around 1.8–3.6 V)
- Debug and programming via SWD/JTAG interfaces
- Peripherals and memory protection features, watchdog timers, and reset sources
- Suitable for low-power, embedded applications with flexible I/O and multiple package options
Note: exact Flash/SRAM sizes and package options vary by specific variant. Refer to the datasheet for precise numbers and supported features for ATSAMC21J18A-MUT.
- 32-bit ARM Cortex-M0+ core, up to 48 MHz
- On-chip Flash memory and SRAM
- SERCOM peripherals for UART, SPI, and I2C (flexible pin multiplexing with DMA support)
- USB 2.0 Full-Speed device (where applicable on the package)
- Analog: 12-bit ADC with multiple channels (typical for the family)
- Timers, PWM, and capture/compare features
- Event System and DMA controller for low‑CPU‑overhead peripheral signaling
- Power management: multiple sleep modes, deep sleep, and brown-out/reset options
- Wide operating voltage range (generally around 1.8–3.6 V)
- Debug and programming via SWD/JTAG interfaces
- Peripherals and memory protection features, watchdog timers, and reset sources
- Suitable for low-power, embedded applications with flexible I/O and multiple package options
Note: exact Flash/SRAM sizes and package options vary by specific variant. Refer to the datasheet for precise numbers and supported features for ATSAMC21J18A-MUT.
Package
144-pin LQFP package.
Pinout
Pin count: 100 pins (in the MU package).
Function: a 32‑bit ARM Cortex‑M0+ microcontroller (SAM C21 family) with integrated peripherals (USB, SERCOM/SPI/I2C/UART, ADC/DAC, timers, etc.), typically with up to 256 KB flash and 32 KB RAM.
Function: a 32‑bit ARM Cortex‑M0+ microcontroller (SAM C21 family) with integrated peripherals (USB, SERCOM/SPI/I2C/UART, ADC/DAC, timers, etc.), typically with up to 256 KB flash and 32 KB RAM.
Manufacturer
Manufacturer: Microchip Technology Inc.
What kind of company: An American multinational semiconductor company that designs and manufactures microcontrollers, memory, and analog ICs for embedded systems (owns the SAM microcontroller line after acquiring Atmel).
What kind of company: An American multinational semiconductor company that designs and manufactures microcontrollers, memory, and analog ICs for embedded systems (owns the SAM microcontroller line after acquiring Atmel).
Application
ATSAMC21J18A-MUT is a 32‑bit ARM Cortex‑M0+ MCU suitable for:
- Industrial automation and control
- Motor control and power electronics
- Smart meters and energy-management systems
- IoT devices and gateways
- Building/home automation
- Automotive body electronics and sensor interfaces
(Compact, low-power embedded solutions across automation, energy, IoT, and automotive applications.)
- Industrial automation and control
- Motor control and power electronics
- Smart meters and energy-management systems
- IoT devices and gateways
- Building/home automation
- Automotive body electronics and sensor interfaces
(Compact, low-power embedded solutions across automation, energy, IoT, and automotive applications.)
出荷
出荷方法私たち
DHL、FedEx、TNT、UPS、またはあなたの選択の他の運送業者を通じてグローバルな出荷サービスを提供します。
出荷料参照(DHL/FedEx):
DHL の: 配送費は25ドル〜45ドル(0.5kg)の範囲で、推定配送時間は2〜5営業日です。
フェデックス: 配送費は25ドル〜40ドル(0.5kg)の範囲で、推定配送時間は3〜7営業日。
UPS の: 配送費は25ドル〜45ドル(0.5kg)の範囲で、推定配送時間は3〜7営業日。
TNT社: 配送費は25ドル〜65ドル(0.5kg)の範囲で、推定配送時間は3〜7営業日。
EMS: 配送料金は30〜50ドル(0.5kg)の範囲で、推定配送時間は7〜15営業日です。
登録航空郵便: 配送費は2〜4ドル(0.1kg)で、推定配送時間は5〜20営業日です。
支払い
Payment Methods
支払い期間は100%前払いです。
現在、下記の支払い方法のみを受け入れています。:
1. ペイパル
2. クレジット・デビットカード
3. ワイヤー 転送
類似
-
MX25R8035FM1IL0
Macronix
-
MX25V1635FZNI
Macronix
-
MX66U1G45GXDI00
Macronix
-
MX25V5126FM1I
Macronix
-
MX25V2033FM1I
Macronix
-
MX25V16066M2I02
Macronix
-
MX30LF2G28AD-TI
Macronix
-
MX25L8035EM2I-10G
Macronix
-
MX25R6435FBDIL0
Macronix
-
MX29GL512FHXFI-11..
Macronix
-
MX25L2006EM1I-12G
Macronix
-
MX25L12833FM2I-10..
Macronix