ATMEGA32-16AUR

画像は参照用のみです。

ATMEGA32-16AUR

IC MCU 8BIT 32KB FLASH 44TQFP

100% オリジナル &新しい

出荷の準備ができている24時間

365日の保証

RFQおよびもっと割引を得る

仕様

Supplier Microchip Technology
Package Tape & Reel (TR),Cut Tape (CT)
Series AVR® ATmega
ProductStatus Active
CoreProcessor AVR
CoreSize 8-Bit
Speed 16MHz
Connectivity I²C, SPI, UART/USART
Peripherals Brown-out Detect/Reset, POR, PWM, WDT
NumberofI/O 32
ProgramMemorySize 32KB (16K x 16)
ProgramMemoryType FLASH
EEPROMSize 1K x 8
RAMSize 2K x 8
Voltage-Supply(Vcc/Vdd) 4.5V ~ 5.5V
DataConverters A/D 8x10b
OscillatorType Internal
OperatingTemperature -40°C ~ 85°C (TA)
MountingType Surface Mount
Package/Case 44-TQFP

概要

Description

ATmega32-16AUR is an Atmel/Microchip 8-bit AVR microcontroller from the ATmega32 family. It’s designed for embedded control with a balance of performance and peripherals.
Key points:
- CPU: AVR RISC core, up to 16 MHz operation (about 16 MIPS at 16 MHz).
- Memory: 32 KB Flash program memory, 1 KB EEPROM, 2 KB SRAM.
- I/O and timing: 32 I/O lines (4 ports), 3 timers (8/16-bit), 8-channel 10-bit ADC, analog comparator.
- Peripherals: USART, SPI, I2C (TWI), JTAG (on some packages) for debugging; rich interrupt support.
- Power/voltage: typically 2.7–5.5 V supply; designed for low-power modes (sleep, watchdog).
- Packaging: available in common 40-pin packages (e.g., PDIP-40, TQFP-44) with standard ISP programming.
- Typical uses: general embedded control, sensors, motor control, small appliances, hobby projects.
In short, ATmega32-16AUR is a versatile, low-power AVR MCU suitable for mid-range embedded tasks requiring decent memory and rich peripherals.

Features

Key features of ATMEGA32-16AUR (ATmega32 in AU package, 16 MHz):
- 8-bit AVR RISC architecture; most instructions execute in one cycle
- Memory: 32 KB Flash program memory; 2 KB SRAM; 1 KB EEPROM
- I/O: 32 general-purpose I/O lines (PORTA–PORTD)
- Clock/voltage: operates up to 16 MHz; supply voltage 2.7–5.5 V
- Clocks: external crystal/ceramic resonator or internal RC oscillator option
- Timers/PWMs: 3 timers (Timer0 8-bit, Timer1 16-bit, Timer2 8-bit) with multiple PWM outputs
- Analog: 8-channel 10-bit ADC; analog comparator
- Communication: USART, SPI, and Two-Wire Interface (I2C)
- Debug/Programming: In-system programming (ISP) via SPI; typically supports on-chip debugging (depending on package)
- Power management: Watchdog Timer, brown-out detection, various sleep modes
- Package: AU version (32-pin TQFP/QFN family)
- Applications: embedded control, sensing, motor control, peripherals, consumer electronics
Note: exact pinout and JTAG availability depend on package variant.

Package

In short: ATMEGA32-16AUR uses a 44-pin TQFP (Quad Flat Package); AU indicates TQFP, and R denotes Tape‑and‑Reel packaging.

Pinout

- Pin count: 44 pins (TQFP package) for the ATmega32-16AUR variant (AU/UR suffixes indicate the 44‑pin surface‑mount package).
- Function (high level): 8‑bit AVR microcontroller with 32 I/O lines (PA0–PA7, PB0–PB7, PC0–PC7, PD0–PD7), plus power/ground and special pins. Key pins and blocks:
- Power: VCC, GND, AVCC, AGND, AREF
- Clock/reset: XTAL1, XTAL2, /RESET
- Peripherals I/O: SPI (MOSI, MISO, SCK, SS), USART (RXD/TXD), TWI/I2C (SDA/SCL)
- ADC: 8-channel 10‑bit ADC (ADC0–ADC7)
- Timers: Timer0, Timer1, Timer2
- Other: Analog comparator, watchdog timer
In short: 44 pins total; 32 GPIOs plus dedicated power, reset, clock pins and multiple peripheral interfaces (SPI, I2C, USART), ADCs and timers.

Manufacturer

- Manufacturer: Microchip Technology Inc. The ATMEGA32-16AUR originates from Atmel’s AVR line, and Microchip acquired Atmel in 2016, continuing the AVR product family.
- What kind of company: A multinational semiconductor company that designs, develops, and manufactures embedded microcontrollers (like AVR), analog and memory ICs, and related semiconductor products. It is publicly traded (Nasdaq: MCHP) and headquartered in Arizona, USA.

Application

Common application areas for ATmega32-16AUR:
- Consumer electronics and home appliances control
- Robotics, motor control and mechatronics
- Sensor interfacing, data acquisition and logging
- Home automation and IoT devices
- Small industrial controllers and process monitoring
- Educational kits, prototyping and hobby projects

出荷

出荷方法私たち

DHL、FedEx、TNT、UPS、またはあなたの選択の他の運送業者を通じてグローバルな出荷サービスを提供します。


出荷料参照（DHL/FedEx）:

DHL の: 配送費は25ドル〜45ドル（0.5kg）の範囲で、推定配送時間は2〜5営業日です。

フェデックス: 配送費は25ドル〜40ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

UPS の: 配送費は25ドル〜45ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

TNT社: 配送費は25ドル〜65ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

EMS: 配送料金は30〜50ドル（0.5kg）の範囲で、推定配送時間は7〜15営業日です。

登録航空郵便: 配送費は2〜4ドル（0.1kg）で、推定配送時間は5〜20営業日です。

支払い

Payment Methods

支払い期間は100％前払いです。

現在、下記の支払い方法のみを受け入れています。:

1. ペイパル

2. クレジット・デビットカード

3. ワイヤー 転送

類似