ATMEGA1608-MUR

画像は参照用のみです。

ATMEGA1608-MUR

IC MCU 8BIT 16KB FLASH 32VQFN

100% オリジナル &新しい

出荷の準備ができている24時間

365日の保証

RFQおよびもっと割引を得る

仕様

Supplier Microchip Technology
Package Tape & Reel (TR),Cut Tape (CT)
Series megaAVR® 0, Functional Safety (FuSa)
ProductStatus Active
CoreProcessor AVR
CoreSize 8-Bit
Speed 20MHz
Connectivity I²C, SPI, UART/USART
Peripherals Brown-out Detect/Reset, POR, PWM, WDT
NumberofI/O 27
ProgramMemorySize 16KB (16K x 8)
ProgramMemoryType FLASH
EEPROMSize 256 x 8
RAMSize 2K x 8
Voltage-Supply(Vcc/Vdd) 1.8V ~ 5.5V
DataConverters A/D 12x10b
OscillatorType Internal
OperatingTemperature -40°C ~ 85°C (TA)
MountingType Surface Mount
Package/Case 32-VFQFN Exposed Pad

概要

Description

Introduction to ATMEGA1608-MUR
- It is an 8‑bit AVR microcontroller from Atmel/Microchip, part of the megaAVR family designed for small embedded control tasks. It uses the AVR RISC core with flash for program memory, RAM for data, and EEPROM for nonvolatile storage.
- Peripherals: I/O ports, multiple timers and PWM outputs, ADC, USART/UART, SPI, I2C/TWI, analog comparator, watchdog timer, Brown‑out detect, and various sleep modes for low power.
- Power and performance: operates from a single supply (low voltage range) and can run at up to tens of MHz in normal mode with flexible clock options.
- Programming and toolchain: supports UPDI or SPI programming depending on package; supported by Microchip Studio/Atmel Studio and the avr-gcc toolchain.
- Typical use: hobbyist projects, sensors, motor control, and small embedded systems requiring moderate peripherals and low power.
- Getting started: read the datasheet, install Microchip Studio, write code in C or assembly, compile with avr-gcc, and program with a suitable programmer.

Features

ATmega1608-MUR features (concise):
- 8-bit AVR core, up to 20 MHz operation
- Operating voltage: 1.8–5.5 V (wide voltage range for battery/sensor apps)
- Memory: Flash program memory, SRAM, and EEPROM (sizes per datasheet)
- Peripherals: USART/UART, SPI, and I2C/TWI
- Timers: multiple timers (at least two 8-bit with PWM and one 16-bit timer/counter)
- Analog: 10-bit ADC and analog comparator
- Interrupts: extensive interrupt system with multiple external and peripheral sources
- Power management: several sleep modes, watchdog timer, Brown-out detector
- Programming/debug: In-System Programming (ISP) and bootloader support; fuse/lock bits
- I/O: plenty of GPIOs with Pin Change capabilities
- Package: MUR variant (compact package suitable for space-constrained designs)
Note: exact memory sizes, available peripherals, and I/O counts are specified in the official datasheet for the specific device revision.

Package

The ATMEGA1608-MUR comes in a 32‑pin MLF (QFN) package (about 5x5 mm), RoHS compliant.

Pinout

- Pin count: 32 pins (MUR package, e.g., QFN/MQFP 32-pin)
- Function: 8-bit AVR microcontroller (megaAVR family) for general-purpose embedded control; provides GPIO, timers, ADC, and serial interfaces (USART/SPI/I2C).

Manufacturer

Manufacturer: Microchip Technology Inc.
Microchip is an American multinational semiconductor company that designs, develops, manufactures, and sells microcontrollers, analog ICs, memory, and other embedded semiconductor products. It acquired Atmel in 2016, bringing the AVR ATmega line (including the ATMEGA1608) under Microchip’s umbrella.

Application

Typical applications of ATmega1608-MUR:
- Small embedded control tasks in consumer electronics and appliances
- IoT and sensor nodes, home automation controllers
- LED lighting controllers and dimmers
- Motor control for small DC motors
- Data acquisition and logging, battery-powered devices, simple user interfaces (keypad/displays), hobbyist/educational projects

出荷

出荷方法私たち

DHL、FedEx、TNT、UPS、またはあなたの選択の他の運送業者を通じてグローバルな出荷サービスを提供します。


出荷料参照(DHL/FedEx):

DHL の: 配送費は25ドル〜45ドル(0.5kg)の範囲で、推定配送時間は2〜5営業日です。

フェデックス: 配送費は25ドル〜40ドル(0.5kg)の範囲で、推定配送時間は3〜7営業日。

UPS の: 配送費は25ドル〜45ドル(0.5kg)の範囲で、推定配送時間は3〜7営業日。

TNT社: 配送費は25ドル〜65ドル(0.5kg)の範囲で、推定配送時間は3〜7営業日。

EMS: 配送料金は30〜50ドル(0.5kg)の範囲で、推定配送時間は7〜15営業日です。

登録航空郵便: 配送費は2〜4ドル(0.1kg)で、推定配送時間は5〜20営業日です。

支払い

Payment Methods

支払い期間は100%前払いです。

現在、下記の支払い方法のみを受け入れています。:

1. ペイパル

2. クレジット・デビットカード

3. ワイヤー 転送