画像は参照用のみです。
AQY412EHA
SSR RELAY SPST-NC 550MA 0-60V
- メーカー
- Mfr。パート #AQY412EHA
- パッケージ
- データシート
- 在庫中21723
100% オリジナル &新しい
出荷の準備ができている24時間
365日の保証
RFQおよびもっと割引を得る
仕様
| Series | PhotoMOS™ AQY |
| Part Status | Active |
| Base Product Number | AQY412 |
| Mounting Type | Surface Mount |
| Relay Type | Photo-Coupled Relay (Photorelay) |
| Circuit | SPST-NC (1 Form B) |
| Output Type | AC, DC |
| Voltage - Input | 1.14VDC |
| Voltage - Load | 0 V ~ 60 V |
| Load Current | 550 mA |
| Termination Style | Gull Wing |
| Operating Temperature | -40°C ~ 85°C |
| Package | 4-SMD (0.300", 7.62mm) |
| Supplier Device Package | 4-SMD |
| Approval Agency | BSI, cURus |
| Packaging | Tube |
| On-State Resistance (Max) | 2.5 Ohms |
概要
Description
AQY412EHA is Panasonic’s single-channel photomos relay (optically isolated MOSFET output) in the AQY family. It uses an input LED to optically actuate two MOSFETs on the output side, providing galvanic isolation between input and output.
Key points:
- 1-channel optically isolated switch; MOSFET output can switch DC and AC loads.
- High input-to-output isolation for safety and noise immunity.
- Input side requires only a small drive current (LED forward current in the few mA range) to turn on; off-state leakage is small.
- Output side offers bidirectional MOSFET switching with low on-resistance when on (no mechanical wear, fast switching).
Typical uses:
- Signal isolation for microcontrollers and logic circuits
- Interface between low-voltage controllers and higher-voltage loads
- Industrial, automotive, and consumer electronics where galvanic isolation is desired
For exact electrical specifications (Vds, If, Id, Rds(on), isolation voltage, package), refer to the AQY412EHA datasheet.
Key points:
- 1-channel optically isolated switch; MOSFET output can switch DC and AC loads.
- High input-to-output isolation for safety and noise immunity.
- Input side requires only a small drive current (LED forward current in the few mA range) to turn on; off-state leakage is small.
- Output side offers bidirectional MOSFET switching with low on-resistance when on (no mechanical wear, fast switching).
Typical uses:
- Signal isolation for microcontrollers and logic circuits
- Interface between low-voltage controllers and higher-voltage loads
- Industrial, automotive, and consumer electronics where galvanic isolation is desired
For exact electrical specifications (Vds, If, Id, Rds(on), isolation voltage, package), refer to the AQY412EHA datasheet.
Features
AQY412EHA is a Panasonic PhotoMOS relay (MOSFET output). Key features:
- 1-channel, Form A (normally open) output
- MOSFET output with no mechanical contacts (no bounce, long life)
- High input–output isolation (several kV RMS typical)
- Low input drive current (LED-driven)
- Quick switching with very low on resistance and leakage when OFF
- Small surface-mount package (8-pin) and RoHS compliant
- Wide operating temperature range
Note: exact electrical ratings (Vds, Id, Ron, leakage, etc.) vary by part; consult the datasheet for the precise values of AQY412EHA.
- 1-channel, Form A (normally open) output
- MOSFET output with no mechanical contacts (no bounce, long life)
- High input–output isolation (several kV RMS typical)
- Low input drive current (LED-driven)
- Quick switching with very low on resistance and leakage when OFF
- Small surface-mount package (8-pin) and RoHS compliant
- Wide operating temperature range
Note: exact electrical ratings (Vds, Id, Ron, leakage, etc.) vary by part; consult the datasheet for the precise values of AQY412EHA.
Package
AQY412EHA is a Panasonic PhotoMOS relay in an 8-pin surface-mount package (SOP-8, gull-wing).
Pinout
AQY412EHA has 4 pins. Function: it’s a PhotoMOS (solid‑state) relay — a single‑pole, normally‑open (1 Form A) optically‑isolated device. Two pins are the LED input (anode, cathode) and two are the MOSFET output terminals (isolated source/drain) used to switch AC/DC loads.
Manufacturer
- Manufacturer: Panasonic (Panasonic Corporation, via its Semiconductor Solutions division; AQY series PhotoMOS relays).
- Company type: A Japanese multinational electronics company that designs and manufactures consumer electronics, semiconductors, and other electronic components.
- Company type: A Japanese multinational electronics company that designs and manufactures consumer electronics, semiconductors, and other electronic components.
Application
AQY412EHA is a PhotoMOS relay (optically isolated MOSFET output). Typical applications include:
- Isolated switching of low-power loads controlled by microcontrollers
- Relay replacement in control circuits
- Driving small AC/DC loads in consumer electronics
- LED lighting control
- Signal isolation in industrial automation
- Telecom/network equipment
- Measurement/test equipment
- Home appliances and HVAC controller boards
- Isolated switching of low-power loads controlled by microcontrollers
- Relay replacement in control circuits
- Driving small AC/DC loads in consumer electronics
- LED lighting control
- Signal isolation in industrial automation
- Telecom/network equipment
- Measurement/test equipment
- Home appliances and HVAC controller boards
出荷
出荷方法私たち
DHL、FedEx、TNT、UPS、またはあなたの選択の他の運送業者を通じてグローバルな出荷サービスを提供します。
出荷料参照(DHL/FedEx):
DHL の: 配送費は25ドル〜45ドル(0.5kg)の範囲で、推定配送時間は2〜5営業日です。
フェデックス: 配送費は25ドル〜40ドル(0.5kg)の範囲で、推定配送時間は3〜7営業日。
UPS の: 配送費は25ドル〜45ドル(0.5kg)の範囲で、推定配送時間は3〜7営業日。
TNT社: 配送費は25ドル〜65ドル(0.5kg)の範囲で、推定配送時間は3〜7営業日。
EMS: 配送料金は30〜50ドル(0.5kg)の範囲で、推定配送時間は7〜15営業日です。
登録航空郵便: 配送費は2〜4ドル(0.1kg)で、推定配送時間は5〜20営業日です。
支払い
Payment Methods
支払い期間は100%前払いです。
現在、下記の支払い方法のみを受け入れています。:
1. ペイパル
2. クレジット・デビットカード
3. ワイヤー 転送
類似
-
MX25L3233FM1I-08Q
Macronix
-
MX29F400CBTI-70G
Macronix
-
MX25V16066M1I02
Macronix
-
MX25V16066M2I02
Macronix
-
MX25L8035EM2I-10G
Macronix
-
MX29GL512FHXFI-11..
Macronix
-
MX25U3232FZBI02
Macronix
-
MX25U6435FM2I-10G
Macronix
-
MX25L12833FM2I-10..
Macronix
-
MX25L12833FZ2I-10..
Macronix
-
MX25L12835FZ2I-10..
Macronix
-
MX29F040CTI-70G
Macronix