AMIS30663CANG2G

画像は参照用のみです。

AMIS30663CANG2G

IC TRANSCEIVER HALF 1/1 8SOIC

100% オリジナル &新しい

出荷の準備ができている24時間

365日の保証

RFQおよびもっと割引を得る

仕様

Supplier onsemi
Package Tube
ProductStatus Obsolete
Type Transceiver
Protocol CANbus
NumberofDrivers/Receivers 1/1
Duplex Half
ReceiverHysteresis 70 mV
Voltage-Supply 4.75V ~ 5.25V
OperatingTemperature -40°C ~ 125°C
MountingType Surface Mount
Package/Case 8-SOIC (0.154, 3.90mm Width)

概要

Description

AMIS30663CANG2G is an automotive‑grade magnetic rotary angle sensor from the AMIS30663 family. It integrates a Hall sensor, signal processing, and a CAN interface to deliver an absolute angular position of a magnet‑encoded rotor. Designed for real‑time angle feedback, it’s used in automotive and industrial applications such as motor control, steering, and actuators.
Key points:
- 360° absolute angle measurement using a magnetic field
- CAN communication to report angle and diagnostic/status information
- Self-contained: requires only power and a magnet/rotor
- Automotive‑grade features: wide operating temperature, fault detection (e.g., magnet absence, overtemperature), and robust data communication
- Programmable/calibration options (e.g., zero offset or linearization) as supported by the device
For exact electrical specs, magnet requirements, package details, and CAN protocol format (CAN 2.0A/B or CAN FD), consult the official AMIS30663CANG2G datasheet and user guide.

Features

I don’t have the exact datasheet on hand. If AMIS30663CANG2G is a CAN bus transceiver, typical features would include:
- CAN interface: TXD/RXD pins to CANH/CANL bus
- Supply: 3.3–5 V operation (often 5 V tolerant)
- Data rate: up to 1 Mbps (ISO 11898-2 compatible)
- Protective features: short-circuit protection on CANH/CANL, overvoltage protection, undervoltage detection
- Fault/status: FAULT or equivalent status indication; RX/TX status
- Robustness: ESD protection on CAN lines; wide operating temperature range (e.g., -40 to 125°C)
- Power modes: low quiescent current or sleep/standby mode
- Package: compact 8-pin package (typical for CAN transceivers)
For precise, exact features, please share the datasheet link or confirm it’s the CAN transceiver variant, and I’ll summarize the official specification.

Package

SOIC-8 (8-pin Small Outline Integrated Circuit) package.

Pinout

- Pin count: 8 pins
- Function: Single-channel CAN transceiver. Interfaces a CAN controller to the CAN bus, converting TXD to differential CANH/CANL signals and providing RXD back to the controller, with VCC and GND pins and an optional standby/mode pin depending on the variant.

Manufacturer

Manufacturer: AMIS. AMIS is a semiconductor company that designs and manufactures analog and mixed-signal integrated circuits, often used in automotive and industrial applications.

Application

AMIS30663CANG2G is a magnetic angle/position sensor IC. Typical applications:
- Automotive motor control (BLDC/PM motors, position feedback)
- Industrial automation and robotics (servo drives, rotary encoders, motor feedback)
- Consumer appliances/tools requiring non-contact angular sensing in harsh environments

出荷

出荷方法私たち

DHL、FedEx、TNT、UPS、またはあなたの選択の他の運送業者を通じてグローバルな出荷サービスを提供します。


出荷料参照（DHL/FedEx）:

DHL の: 配送費は25ドル〜45ドル（0.5kg）の範囲で、推定配送時間は2〜5営業日です。

フェデックス: 配送費は25ドル〜40ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

UPS の: 配送費は25ドル〜45ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

TNT社: 配送費は25ドル〜65ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

EMS: 配送料金は30〜50ドル（0.5kg）の範囲で、推定配送時間は7〜15営業日です。

登録航空郵便: 配送費は2〜4ドル（0.1kg）で、推定配送時間は5〜20営業日です。

支払い

Payment Methods

支払い期間は100％前払いです。

現在、下記の支払い方法のみを受け入れています。:

1. ペイパル

2. クレジット・デビットカード

3. ワイヤー 転送

類似