画像は参照用のみです。
AD5220BRMZ100
IC DGTL POT 100KOHM 128TAP 8MSOP
- メーカー
- Mfr。パート #AD5220BRMZ100
- パッケージ 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
- データシート AD5220BRMZ100 DataSheet
- 在庫中8635
100% オリジナル &新しい
出荷の準備ができている24時間
365日の保証
RFQおよびもっと割引を得る
仕様
| Supplier | Rochester Electronics, LLC,Analog Devices Inc. |
| Package | Bulk,Tube |
| ProductStatus | Active |
| Taper | Linear |
| Configuration | Potentiometer |
| NumberofCircuits | 1 |
| NumberofTaps | 128 |
| Resistance(Ohms) | 100k |
| Interface | Up/Down (U/D, CS) |
| MemoryType | Volatile |
| Voltage-Supply | 2.7V ~ 5.5V |
| Tolerance | ±30% |
| TemperatureCoefficient(Typ) | 800ppm/°C |
| MountingType | Surface Mount |
| SupplierDevicePackage | 8-MSOP |
| Package/Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| OperatingTemperature | -40°C ~ 85°C |
概要
Description
AD5220BRMZ-100 is an Analog Devices digital potentiometer with a 100 kΩ end-to-end resistance between terminals A and B. It offers a programmable wiper (W) position, allowing software-controlled adjustment of resistance in analog circuits. Communication is via a serial interface (SPI-compatible), controlled by a microcontroller to set the wiper position. The device is packaged in an 8-pin RoHS-compliant BRMZ package. Typical uses include gain/offset trimming, programmable attenuators, and sensor calibration in embedded systems. Always consult the datasheet for exact electrical specs, timing, and packaging details.
Features
Here are concise features of the AD5220BRMZ100 (digital potentiometer):
- Dual digital potentiometers with I2C interface
- End-to-end resistance: 100 kΩ (typical)
- 256 wiper positions (8-bit resolution)
- Nonvolatile memory to retain wiper settings (NV capable)
- Supply voltage: 2.7 V to 5.5 V
- Low quiescent current; suitable for battery-powered apps
- Temperature range: -40°C to +125°C
- Package: BRMZ (likely MSOP-8)
- Guaranteed monotonic wiper operation
- Optional shutdown/power-down modes for low power
Note: exact NV behavior and interface details should be confirmed in the latest datasheet.
- Dual digital potentiometers with I2C interface
- End-to-end resistance: 100 kΩ (typical)
- 256 wiper positions (8-bit resolution)
- Nonvolatile memory to retain wiper settings (NV capable)
- Supply voltage: 2.7 V to 5.5 V
- Low quiescent current; suitable for battery-powered apps
- Temperature range: -40°C to +125°C
- Package: BRMZ (likely MSOP-8)
- Guaranteed monotonic wiper operation
- Optional shutdown/power-down modes for low power
Note: exact NV behavior and interface details should be confirmed in the latest datasheet.
Package
MSOP-8. AD5220BRMZ100 comes in an 8‑lead MSOP (Molded Small Outline) package, RoHS‑compliant (MZ suffix).
Pinout
- Pin count: 8 pins (MSOP-8/SOIC-8 package).
- Function: Single-channel digital potentiometer with 100 kΩ end-to-end resistance; wiper controlled via an SPI-compatible interface (CS, SCK, SDI) with A, B, and W terminals plus VDD and GND.
- Function: Single-channel digital potentiometer with 100 kΩ end-to-end resistance; wiper controlled via an SPI-compatible interface (CS, SCK, SDI) with A, B, and W terminals plus VDD and GND.
Manufacturer
Analog Devices, Inc. (ADI). It is an American multinational semiconductor company that designs and manufactures analog, mixed-signal, and digital signal processing (DSP) integrated circuits, as well as related sensors.
Application
AD5220BRMZ100 is a dual digitally controlled potentiometer (DCP). Common applications:
- Programmable gain/attenuation in op-amp feedback and signal conditioning
- Sensor and ADC/DAC offset/trim calibration
- Programmable voltage dividers and reference generation
- Audio volume control, tone shaping, and impedance matching
- Attenuation and calibration in communication links and instrumentation
- Servo/control-loop tuning requiring remote resistance adjustment
Word count well under 100.
- Programmable gain/attenuation in op-amp feedback and signal conditioning
- Sensor and ADC/DAC offset/trim calibration
- Programmable voltage dividers and reference generation
- Audio volume control, tone shaping, and impedance matching
- Attenuation and calibration in communication links and instrumentation
- Servo/control-loop tuning requiring remote resistance adjustment
Word count well under 100.
Equivalent
Possible cross-references for AD5220BRMZ100 (digital potentiometer) include:
- Microchip MCP41/MCP42 series (SPI, various end-to-end values like 5k/10k/50k/100k)
- Maxim MAX5251/MAX5252 series (SPI, 128-step pots, various end-to-end values)
- Analog Devices AD5252/AD5254 (I2C, multi-channel variants)
Note: exact substitution depends on interface (SPI vs I2C), number of pots, and end-to-end resistance. Check datasheets and cross-reference tools for precise compatibility.
- Microchip MCP41/MCP42 series (SPI, various end-to-end values like 5k/10k/50k/100k)
- Maxim MAX5251/MAX5252 series (SPI, 128-step pots, various end-to-end values)
- Analog Devices AD5252/AD5254 (I2C, multi-channel variants)
Note: exact substitution depends on interface (SPI vs I2C), number of pots, and end-to-end resistance. Check datasheets and cross-reference tools for precise compatibility.
出荷
出荷方法私たち
DHL、FedEx、TNT、UPS、またはあなたの選択の他の運送業者を通じてグローバルな出荷サービスを提供します。
出荷料参照(DHL/FedEx):
DHL の: 配送費は25ドル〜45ドル(0.5kg)の範囲で、推定配送時間は2〜5営業日です。
フェデックス: 配送費は25ドル〜40ドル(0.5kg)の範囲で、推定配送時間は3〜7営業日。
UPS の: 配送費は25ドル〜45ドル(0.5kg)の範囲で、推定配送時間は3〜7営業日。
TNT社: 配送費は25ドル〜65ドル(0.5kg)の範囲で、推定配送時間は3〜7営業日。
EMS: 配送料金は30〜50ドル(0.5kg)の範囲で、推定配送時間は7〜15営業日です。
登録航空郵便: 配送費は2〜4ドル(0.1kg)で、推定配送時間は5〜20営業日です。
支払い
Payment Methods
支払い期間は100%前払いです。
現在、下記の支払い方法のみを受け入れています。:
1. ペイパル
2. クレジット・デビットカード
3. ワイヤー 転送
類似
-
MX25L3233FM1I-08Q
Macronix
-
MX29F400CBTI-70G
Macronix
-
MX66U1G45GXDI00
Macronix
-
MX25V4035FZUI
Macronix
-
MX25R3235FZNIL0
Macronix
-
MX25L25673GMI-08G
Macronix
-
MX25L25673GMI-10G
Macronix
-
MX25R1635FZUIH0
Macronix
-
MX25V1635FM2I
Macronix
-
MX25L6433FM2I-08G
Macronix
-
MX29LV160DTTI-70G
Macronix
-
MX29F040CQI-70G
Macronix