画像は参照用のみです。
74LCX541FT
IC BUF NON-INVERT 3.6V 20TSSOP
- メーカー
- Mfr。パート #74LCX541FT
- パッケージ 20-TSSOP (0.173, 4.40mm Width)
- データシート
- 在庫中4527
100% オリジナル &新しい
出荷の準備ができている24時間
365日の保証
RFQおよびもっと割引を得る
仕様
| Supplier | Toshiba Semiconductor and Storage |
| Package | Tape & Reel (TR),Cut Tape (CT) |
| Series | TC74LCX |
| ProductStatus | Obsolete |
| LogicType | Buffer, Non-Inverting |
| NumberofElements | 1 |
| NumberofBitsperElement | 8 |
| OutputType | 3-State |
| Current-OutputHighLow | 24mA, 24mA |
| Voltage-Supply | 1.65V ~ 3.6V |
| OperatingTemperature | -40°C ~ 85°C (TA) |
| MountingType | Surface Mount |
| Package/Case | 20-TSSOP (0.173, 4.40mm Width) |
概要
Description
The 74LCX541FT is an octal buffer/line driver with 3-state outputs from the 74LCX CMOS family. It buffers an 8-bit data bus (A0–A7) to eight outputs (Y0–Y7) and uses two independent, active‑low enables (OE1 and OE2) to tri-state each 4‑bit half. It is non-inverting, used to widen a data bus, isolate loads, or level-shift between devices in low-voltage systems.
Key points:
- 8-bit buffer with two 4-bit sections, each with its own active-low OE
- Non-inverting, tri-state outputs
- Low-voltage CMOS device (typical operation in the 2.0–3.6 V range; check datasheet for exact Vcc)
- Package: 20-pin (common SOIC/related), FT suffix indicates packaging/lead-free/tape-and-reel variants
Typical usage:
- Tie OE1 and OE2 low to enable outputs; raise them to tri-state.
- Use as a data buffer or bus-expansion between ICs or microcontrollers within a compatible voltage level.
Key points:
- 8-bit buffer with two 4-bit sections, each with its own active-low OE
- Non-inverting, tri-state outputs
- Low-voltage CMOS device (typical operation in the 2.0–3.6 V range; check datasheet for exact Vcc)
- Package: 20-pin (common SOIC/related), FT suffix indicates packaging/lead-free/tape-and-reel variants
Typical usage:
- Tie OE1 and OE2 low to enable outputs; raise them to tri-state.
- Use as a data buffer or bus-expansion between ICs or microcontrollers within a compatible voltage level.
Features
Here are the key features of the 74LCX541FT (octal buffer/line driver with 3-state outputs):
- 8-bit, noninverting buffer/driver with three-state outputs
- Vcc range: 2.0 V to 3.6 V (LCX family) for compatibility with 3.3 V logic
- D0–D7 inputs; Q0–Q7 outputs
- Output Enable (G or OE) to place all outputs in high-impedance state
- Ioff specification for partial-power-down (no back-powering when Vcc is 0)
- CMOS low-power operation with reduced static/dynamic power
- TTL/CMOS-compatible input thresholds and good noise margins
- ESD protection (typical robust protection for handling static)
- Suitable for bus driving and interfacing multiple devices
- Packaging options (FT variant refers to available package type, e.g., small-outline packages)
Note: Exact OE polarity and package details depend on the specific datasheet variant.
- 8-bit, noninverting buffer/driver with three-state outputs
- Vcc range: 2.0 V to 3.6 V (LCX family) for compatibility with 3.3 V logic
- D0–D7 inputs; Q0–Q7 outputs
- Output Enable (G or OE) to place all outputs in high-impedance state
- Ioff specification for partial-power-down (no back-powering when Vcc is 0)
- CMOS low-power operation with reduced static/dynamic power
- TTL/CMOS-compatible input thresholds and good noise margins
- ESD protection (typical robust protection for handling static)
- Suitable for bus driving and interfacing multiple devices
- Packaging options (FT variant refers to available package type, e.g., small-outline packages)
Note: Exact OE polarity and package details depend on the specific datasheet variant.
Package
20-pin TSSOP (Thin Shrink Small Outline) package.
Pinout
- Pin count: 20 pins (DIP-20/SOIC-20)
- Function: Octal buffer/line driver with 3-state outputs. It provides eight data inputs (A1–A8) and eight buffered outputs (Y1–Y8) with an enable control (G) that tri-states the outputs when active.
- Function: Octal buffer/line driver with 3-state outputs. It provides eight data inputs (A1–A8) and eight buffered outputs (Y1–Y8) with an enable control (G) that tri-states the outputs when active.
Manufacturer
Manufacturer: Nexperia. Nexperia is a Dutch semiconductor company (formerly part of Philips/NXP) that designs and manufactures discrete components, logic ICs, MOSFETs, and protection devices for global markets (automotive, industrial, and consumer).
Application
74LCX541FT is an 8-bit D-type transparent latch with 3-state outputs. Applications:
- Bus buffering/interfacing in microprocessor/microcontroller systems
- Latching multiplexed address/data lines (address latch)
- 8-bit data storage/register between CPU and peripherals
- Buffer/driver for memory and I/O buses
- Bus isolation and level-shifting in high-speed logic networks
- Bus buffering/interfacing in microprocessor/microcontroller systems
- Latching multiplexed address/data lines (address latch)
- 8-bit data storage/register between CPU and peripherals
- Buffer/driver for memory and I/O buses
- Bus isolation and level-shifting in high-speed logic networks
Equivalent
Equivalent parts (octal buffer/line driver with 3-state outputs; pin-compatible in 20-pin packages): SN74LS541, SN74HC541, SN74HCT541, SN74LVC541, SN74AHC541, SN74ACT541 (and equivalents from other vendors such as NXP/ON).
出荷
出荷方法私たち
DHL、FedEx、TNT、UPS、またはあなたの選択の他の運送業者を通じてグローバルな出荷サービスを提供します。
出荷料参照(DHL/FedEx):
DHL の: 配送費は25ドル〜45ドル(0.5kg)の範囲で、推定配送時間は2〜5営業日です。
フェデックス: 配送費は25ドル〜40ドル(0.5kg)の範囲で、推定配送時間は3〜7営業日。
UPS の: 配送費は25ドル〜45ドル(0.5kg)の範囲で、推定配送時間は3〜7営業日。
TNT社: 配送費は25ドル〜65ドル(0.5kg)の範囲で、推定配送時間は3〜7営業日。
EMS: 配送料金は30〜50ドル(0.5kg)の範囲で、推定配送時間は7〜15営業日です。
登録航空郵便: 配送費は2〜4ドル(0.1kg)で、推定配送時間は5〜20営業日です。
支払い
Payment Methods
支払い期間は100%前払いです。
現在、下記の支払い方法のみを受け入れています。:
1. ペイパル
2. クレジット・デビットカード
3. ワイヤー 転送
類似
-
MX25V1635FZNQ03
Macronix
-
MX29F400CBTI-70G
Macronix
-
MX25V4035FZUI
Macronix
-
MX25V2033FM1I
Macronix
-
MX25V16066M2I02
Macronix
-
MX25L25673GMI-08G
Macronix
-
MX25U25643GZNI00
Macronix
-
MX25L2006EM1I-12G
Macronix
-
MX25U3232FZBI02
Macronix
-
MX25U6435FM2I-10G
Macronix
-
MX25L12833FZNI-10..
Macronix
-
MX25L12835FZ2I-10..
Macronix