画像は参照用のみです。
74ACT244MTCX
IC BUF NON-INVERT 5.5V 20TSSOP
- メーカー
- Mfr。パート #74ACT244MTCX
- パッケージ 20-TSSOP (0.173, 4.40mm Width)
- データシート 74ACT244MTCX DataSheet
- 在庫中9937
100% オリジナル &新しい
出荷の準備ができている24時間
365日の保証
RFQおよびもっと割引を得る
仕様
| Supplier | onsemi,Rochester Electronics, LLC |
| Package | Tape & Reel (TR),Cut Tape (CT),Bulk |
| Series | 74ACT |
| ProductStatus | Active |
| LogicType | Buffer, Non-Inverting |
| NumberofElements | 2 |
| NumberofBitsperElement | 4 |
| OutputType | 3-State |
| Current-OutputHighLow | 24mA, 24mA |
| Voltage-Supply | 4.5V ~ 5.5V |
| OperatingTemperature | -40°C ~ 85°C (TA) |
| MountingType | Surface Mount |
| Package/Case | 20-TSSOP (0.173, 4.40mm Width) |
概要
Description
74ACT244MTCX is an octal buffer/line driver with tri-state outputs (two 4‑bit sections) in the 74ACT family. It buffers data from inputs to outputs and can place outputs in high impedance when not enabled. Supplied from 4.5–5.5 V (typical 5 V) with TTL-compatible input levels, it delivers fast operation for 5V logic. Each 4-bit section has its own active‑low output enable (1OE and 2OE); when OE is low, the corresponding inputs (A0–A3 and A4–A7) are copied to the outputs (Y0–Y3 and Y4–Y7); when OE is high, those outputs go high impedance. Common uses include bus buffering, data/address line interfacing between CPUs/memory and peripherals, and isolating subsystems in a 5V system. The MTCX suffix denotes a specific package/ordering variant (check the datasheet for exact dimensions and package type, typically MSOP/SOIC in a 20-pin package).
Features
- Octal buffer/driver (A inputs to Y outputs) with 3-state outputs
- Two 4-bit buffers (groups) with independent output-enable inputs (OE1, OE2)
- Outputs go high-impedance when enabled inputs deactivate (tri-state)
- Advanced CMOS logic (74ACT family): high speed, low power
- Supply voltage: 4.5 V to 5.5 V (typical 5.0 V)
- TTL-compatible input thresholds for easy interfacing
- Suitable for bus buffering, data buffering, and inter-chip interfacing
Note: MTCX denotes packaging/lot code variations; function remains as above.
- Two 4-bit buffers (groups) with independent output-enable inputs (OE1, OE2)
- Outputs go high-impedance when enabled inputs deactivate (tri-state)
- Advanced CMOS logic (74ACT family): high speed, low power
- Supply voltage: 4.5 V to 5.5 V (typical 5.0 V)
- TTL-compatible input thresholds for easy interfacing
- Suitable for bus buffering, data buffering, and inter-chip interfacing
Note: MTCX denotes packaging/lot code variations; function remains as above.
Package
The 74ACT244MTCX is a 20‑pin surface-mount device in a SOIC (Small Outline IC) package.
Pinout
Pin count: 20 pins (DIP/SMD package variants).
Function: 74ACT244MTCX is an octal buffer/line driver with 3-state outputs (two 4-bit buffers). It has inputs A0–A7 and outputs Y0–Y7 with two independent active-low enables (/G1 and /G2) to enable/tri-state the corresponding 4-bit groups. When enables are low, data from A is passed to Y; when high, the outputs are high-impedance. Non-inverting buffers used to drive buses.
Function: 74ACT244MTCX is an octal buffer/line driver with 3-state outputs (two 4-bit buffers). It has inputs A0–A7 and outputs Y0–Y7 with two independent active-low enables (/G1 and /G2) to enable/tri-state the corresponding 4-bit groups. When enables are low, data from A is passed to Y; when high, the outputs are high-impedance. Non-inverting buffers used to drive buses.
Manufacturer
- Manufacturer: Texas Instruments (TI)
- Company type: American multinational corporation that designs and manufactures semiconductors and integrated circuits.
- Company type: American multinational corporation that designs and manufactures semiconductors and integrated circuits.
Application
- Octal buffer/driver with two 4-bit sections and tri-state outputs
- Buffers for CPU/memory/address/data buses
- Bus isolation and sharing on backplanes and inter-board buses
- Reduces fan-out/load in high-speed digital circuits
- Peripheral interfacing requiring controlled enable/disable of bus lines
- Buffers for CPU/memory/address/data buses
- Bus isolation and sharing on backplanes and inter-board buses
- Reduces fan-out/load in high-speed digital circuits
- Peripheral interfacing requiring controlled enable/disable of bus lines
Equivalent
Equivalent parts (octal buffer/line driver with 3-state outputs):
- SN74ACT244 (Texas Instruments)
- 74ACT244 (NXP/Philips)
- uPD74ACT244 (Renesas)
- 74ACT244 (ON Semiconductor)
These are drop-in style cross-references within the 74ACT family. Ensure matching Vcc (typ. 4.5–5.5 V) and identical pinout/package.
- SN74ACT244 (Texas Instruments)
- 74ACT244 (NXP/Philips)
- uPD74ACT244 (Renesas)
- 74ACT244 (ON Semiconductor)
These are drop-in style cross-references within the 74ACT family. Ensure matching Vcc (typ. 4.5–5.5 V) and identical pinout/package.
出荷
出荷方法私たち
DHL、FedEx、TNT、UPS、またはあなたの選択の他の運送業者を通じてグローバルな出荷サービスを提供します。
出荷料参照(DHL/FedEx):
DHL の: 配送費は25ドル〜45ドル(0.5kg)の範囲で、推定配送時間は2〜5営業日です。
フェデックス: 配送費は25ドル〜40ドル(0.5kg)の範囲で、推定配送時間は3〜7営業日。
UPS の: 配送費は25ドル〜45ドル(0.5kg)の範囲で、推定配送時間は3〜7営業日。
TNT社: 配送費は25ドル〜65ドル(0.5kg)の範囲で、推定配送時間は3〜7営業日。
EMS: 配送料金は30〜50ドル(0.5kg)の範囲で、推定配送時間は7〜15営業日です。
登録航空郵便: 配送費は2〜4ドル(0.1kg)で、推定配送時間は5〜20営業日です。
支払い
Payment Methods
支払い期間は100%前払いです。
現在、下記の支払い方法のみを受け入れています。:
1. ペイパル
2. クレジット・デビットカード
3. ワイヤー 転送
類似
-
MX25R8035FM1IL0
Macronix
-
MX25V1635FZNQ03
Macronix
-
MX29F400CBTI-70G
Macronix
-
MX25V4035FZUI
Macronix
-
MX25V16066M1I02
Macronix
-
MX25L8035EM2I-10G
Macronix
-
MX25R6435FBDIL0
Macronix
-
MX25L25673GMI-08G
Macronix
-
MX25L25673GMI-10G
Macronix
-
MX25U25643GZNI00
Macronix
-
MX25L2006EM1I-12G
Macronix
-
MX25V1635FM2I
Macronix